I bought a provided 742 woodsmaster in 308.The male I obtained it off stated it would certainly jam and also he take it it to a gunsmith who said it required cleaning for this reason he had actually it excellent it.Well ~ 2 clips it began to jam top top me.The an initial shell casing is almost clear of chamber yet it is putting another one in prior of it bring about it to jam.I have changed the clip, cleaned it consisting of the chamber the best I could.I own 2 other woodsmasters the I have actually never cleaned real well and haven"t had any type of problems.I recognize they where called jamamatics however I have actually had good luck till now. Any assist or advice would certainly be welcomed.

You are watching: Remington 742 woodsmaster 30-06 jamming


*

Mayor of feather Hill, Monroe ar & Ignore button connoisseur Sinister Operative of the politics moment-g.com
*

*

*

Yes, that"s precisely what I"m looking for. I always clean the gas system in mine (which is straightforward with the spray cleaners now) and really lightly oil it. Also, the bolt is straightforward to clean without removing if you take out the cause assembly. Use spray cleaner again and lightly oil.
Mayor of feather Hill, Monroe county & Ignore button connoisseur Sinister Operative of the politics moment-g.com
*

I to be a man of my word, the is every you have on moment-g.com.georgia bring . Org. I had rather be judged through 12,, 보다 to be carried by 6.
Yes, that"s specifically what I"m looking for. I constantly clean the gas device in mine (which is straightforward with the spray cleaners now) and very lightly oil it. Also, the bolt is simple to clean without removing if girlfriend take out the cause assembly. Use spray cleaner again and also lightly oil.
You can have to take the end the "ball" and clean the gas hole harbor under it. Betcha a great cleaning will fix it.......Wish you to be closer...
Yep, great advice. I"ve never had troubles with mine jamming, yet it"s constantly clean. Granted, they"ll constantly be more tempermental than a bolt action, yet that"s life with any automatic in the world.
Mayor of spring Hill, Monroe county & Ignore button connoisseur Sinister Operative that the politics moment-g.com
Have to be shooting one now for some 40 years,they are dubbed a "jamomatic" for a reason.I learned the hard way to clean the room after every 10 rds.Mine came through a chamber brush for this reason the factory must have known there would be trouble through the room fouling up.Have a gunsmith friend what stated he sent two girl trough college working on 742 Woodsmasters!
Have to be shooting one now for some 40 years,they are dubbed a "jamomatic" for a reason.I learned the hard means to clean the room after every 10 rds.Mine came v a room brush therefore the factory must have actually known there would be trouble with the chamber fouling up.Have a gunsmith girlfriend what said he sent out two girl trough college working on 742 Woodsmasters!
Mayor of feather Hill, Monroe county & Ignore switch connoisseur Sinister Operative of the political moment-g.com
I took off the forearm cleaned spring and rod removed trigger assembly and cleaned that,cleaned bolt best I might without removing.cleaned chamber with solvent and brush the came with my 7400 oil the all really lightly.Where is the gas port?I haven"t had actually much luck with disassembling guns in the past largely autos seems prefer something constantly falls off.I only provide $200 because that it but I don"t desire to put much money in it together I acquired it because that my son to use but I got him a various rifle after ~ this one Jammed.Would as with to offer it or profession it if ns can gain it to cycle
Get the to working you son will love the 742 when you fix it. Ns was thinking extractor or ejector together well. Clean the harbor if the doesn"t fix it get a gunsmith come look in ~ it. I"ve been shooting one since they very first came out. I"ve got a 243 and a 30-06.
Stop, think about what you are about to do, process information to brain center, if sensibly conclusion processed, continue cautiously!
I took turn off the forearm cleaned spring and also rod removed cause assembly and cleaned that,cleaned bolt ideal I can without removing.cleaned chamber through solvent and also brush the came v my 7400 oil it all an extremely lightly.Where is the gas port?I haven"t had much luck with disassembling guns in the past largely autos seems prefer something constantly falls off.I only provide $200 because that it however I don"t desire to put much money in it together I acquired it because that my son to use but I obtained him a various rifle ~ this one Jammed.Would similar to to sell it or profession it if i can get it come cycle
Knock the pin out that holds spring/rod assy and also sprayport area good...Watch for ball if yours has one...Spring is kinda long so don"t permit it acquire away...Spray through throttle body spray to clean allcarbon/powder residue....After TB spray usage light gungrease ~ above rod climate install spring spring...After assy ofrod/spring,a tiny oil on outside of spring....
Could among you"ll pin allude the gas harbor area because that me.I obtained the forearm off. I check out spring and also rod assy and also a pin in the direction of the front website on the barrel.I take it it that"s the pin I have to knock out,But where is gas harbor from there? BTW many thanks everyone
Look in ~ this breakdown of the Remington 750 and it has a an excellent picture that the gas port.http://www.realguns.com/Commentary/comar197.htm
Problem is usually v the rails getting loose. Lay on that is side, look right into slot behind ejection port and also look because that the digs in the side of the receiver. If you watch them that the rails. I have tightened rails on hundreds (many) the them.
I had actually a real problem it would jam the spent shell so tight that in the chamber the it would certainly rip the lip turn off the brass as soon as trying to force it open.Don"t shooting anything but factory rem. Ammunition.I fixed mine forever. I sold it to my brother, he thought those guns were the greatest.
I had a real trouble it would jam the spent shell so tight that in the chamber the it would certainly rip the lip turn off the brass as soon as trying to pressure it open.Don"t shoot anything yet factory rem. Ammunition.I addressed mine forever. I sold it to my brother, he thought those weapons were the greatest.

See more: Q: Who Is The Boost Mobile Girl In The Boost Mobile Commercial


My buddy has actually his dads 30-06, and also I swear if friend don"t shoot remington corelokts through it it will certainly jam. I have scrubbed that thing for the last three years and also if you use any kind of other ammo it will jam, CRAZY ns SAY.I prefer my rugers.
*

Georgia outdoor News 4331 seven Islands Rd Madison, GA 30650 (706) 343-0001 (800) 438-4663