You are watching: 2008 chevy hhr key fob programming
You have to program all existing and brand-new remotes the you wish to usage on the vehicle at this time.
☛ You must close all doors and also the rear liftgate/trunk in order for this programming procedure come work.
4. Push the set / Reset switch until “Remote key Learning Active” is displayed.
(vehicle is currently in remote regulate transmitters programming mode).
5. Press and also hold "Lock" and "Unlock" buttons in ~ the same time on an initial remote about 10 sec
(an acoustic signal will sound indicating effective programming).
6. Repeat the previous step for each extr car transmitter (including any kind of existing remote transmitters).
You can have up to 8 programmed remotes for this vehicle. You have to program every remotes consisting of existing remotes.
4. Press and also hold the expedition odometer reset switch for roughly 3 secs until “Remote key Learning Active” displays
(vehicle is now in Remote manage Transmitters programming mode).
5. Press and hold "Lock" and also "Unlock" buttons at the same time on very first remote around 10 sec
(an acoustic signal will sound indicating successful programming).
6. Repeat the previous action for each additional car transmitter (including any type of existing remote transmitters).
See more: Why Are The Connective Tissue Wrappings Of Skeletal Muscle Important
You have the right to have up to 8 programmed remotes because that this vehicle. You should program every remotes consisting of existing remotes.
PN that Remote regulate Transmitters: 15913421, 20868672, 22951510, 15913415, OUC60221, OUC60270 (and similar)