My Brake Light has stopped working on mine 2014 Silverado. I have actually a van topper installed and the center brake light is the end on it as well. I checked the CHMSL fuse and it is fine. Any ideas?


You are watching: 2005 chevy silverado brake lights not working

*

check the wiring come the lights. Inspect the bulbs. Make sure the pigtails/receptacles room receiving power as soon as the brakes space applied.This guide will aid walk you with the repairhttps://www.moment-g.com/articles/brake-lights-not-workingPlease run down this guide and report back.
*

i was messing v my trailer lights and replaced a fuse and it appeared to fix my trailer issue. Yet right after mine tail lights on mine truck immediately stopped working, no brake lights or rotate signals. The just thing that functions is the 3rd brake light. I ve checked all of my fuses and also can t find any bad ones and I freshly replaced mine brake irradiate switch. Walk anyone have any kind of ideas? ns assume the s a fuse i m overlooking.
*

Hi, carry out the ago up lights work? Also, if friend disconnect the trailer from the truck, walk it make a difference?Since the third brake irradiate is working, we recognize it isn't the switch. Execute me a favor. Check the fuse ns circled in pic 1.If the fuse is good, inspect for power to the dark environment-friendly wire in pic 2 and also confirm continuity come ground as well. In pic 3, examine for power to the yellow wire and for continuity come ground.Let me know what you find. Also, permit me know if any type of of the other tail lights space working.Take care, Joe
*

*

The brakes lamp on mine truck will not occupational when I push my brakes. The tail lights work-related on the top yet the bottom tail lamp does not work. The 3rd brake irradiate works, situated at the top over the behind glass. I tried check the fuse under the hood and also on next of the door. All seem to be good, i even changed the brake terminal under the brake pedal. The brake irradiate bulbs r good, Cant number it out.
test or replace the revolve signal and flasher module all the brake and also tail circuits going come the back goes thru below
its in left the instrument panel fuse block on lower left next of dash. Inspect out the diagrams (Below). You re welcome let us know what you find.


See more: Who Is The Hobo On Polar Express, : Fantheories

Electrical difficulty V8 two Wheel journey Automatic 32500 mile mine brake lights carry out not work, but the cab brake light does. The flashers will certainly work and turn indications also. So I know its no in the fuse, and readjusted out both bulbs. Just uncovered out a couple of days ago. Brake lights do not work however all other signals and also the cab brake irradiate works.Tested everything, switch is fine, receiving power to the fuse dashboard under the hood and in the cab fuse. Grounds look good, bulbs good. No clearly shows wiring issues. What would certainly you recommend together a means to test the switch? I have actually spend 8 hours testing every wire in/out that the revolve switch and also the fuse dashboard to no conclusions. I tried jumping across the switch chin to no success. Tried unplugging it come no success.The white(brake power) is good coming the end of the switch going into the fuse panel and also into the turn lever itself. The cm brake irradiate tests good. The rear brake fuse jumps up and also drops ago down to zero top top the multi meter. Testing the backside that the fuse dashboard blue wire tests good 12v as soon as pressing the brake pedal i beg your pardon is odd. Native the wiring diagram all this doesn't do sense. I am trying to find a means to make certain its the switch itself prior to purchasing one. Any ideas would certainly be appreciated. Anyone figure this out yet?